Page 1 of 1

TA 3.0.19 Not Working Properly

Posted: Mon May 02, 2011 4:43 pm
by PHenry1026
TA 3.0.19 not working properly, when resume is activated after a pause article reading seems to start from somewhere near the beginning. Also there is no highlighting of text when reading.

Percy Henry

P.S. In the meantime, I need to re-install TA 3.0.18 where can I find a copy.

Re: TA 3.0.19 Not Working Properly

Posted: Mon May 02, 2011 5:31 pm
by PHenry1026
The problems described above seems to occur with relatively large text. TA 3.0.19, seems to work OK when the article's text size is relatively small.

Percy Henry

Re: TA 3.0.19 Not Working Properly

Posted: Mon May 02, 2011 6:04 pm
by Jim Bretti
Hi Percy,

Can you try installing 3.0.18.6 from http://nextupdownloads.com/files/TA3018U6.exe and see if you have the problem?

Jim

Re: TA 3.0.19 Not Working Properly

Posted: Mon May 02, 2011 6:31 pm
by Jim Bretti
Hi again Percy,

I haven't been able to duplicate this problem yet, so if you see the problem in 3.0.18.6, try going back to 3.0.18.3, at http://nextupdownloads.com/files/TA3018U3.exe. That should help narrow it down some.

Also, are you able to mail me a copy of a document you're seeing this problem with? If you can, please send it to me at jim@nextup.com.

Thanks

Re: TA 3.0.19 Not Working Properly

Posted: Thu May 05, 2011 4:15 pm
by Jim Bretti
This problem is fixed in version 3.0.20.