Page 1 of 1
TA 3.0.19 Not Working Properly
Posted: Mon May 02, 2011 4:43 pm
by PHenry1026
TA 3.0.19 not working properly, when resume is activated after a pause article reading seems to start from somewhere near the beginning. Also there is no highlighting of text when reading.
Percy Henry
P.S. In the meantime, I need to re-install TA 3.0.18 where can I find a copy.
Re: TA 3.0.19 Not Working Properly
Posted: Mon May 02, 2011 5:31 pm
by PHenry1026
The problems described above seems to occur with relatively large text. TA 3.0.19, seems to work OK when the article's text size is relatively small.
Percy Henry
Re: TA 3.0.19 Not Working Properly
Posted: Mon May 02, 2011 6:04 pm
by Jim Bretti
Hi Percy,
Can you try installing 3.0.18.6 from
http://nextupdownloads.com/files/TA3018U6.exe and see if you have the problem?
Jim
Re: TA 3.0.19 Not Working Properly
Posted: Mon May 02, 2011 6:31 pm
by Jim Bretti
Hi again Percy,
I haven't been able to duplicate this problem yet, so if you see the problem in 3.0.18.6, try going back to 3.0.18.3, at
http://nextupdownloads.com/files/TA3018U3.exe. That should help narrow it down some.
Also, are you able to mail me a copy of a document you're seeing this problem with? If you can, please send it to me at
jim@nextup.com.
Thanks
Re: TA 3.0.19 Not Working Properly
Posted: Thu May 05, 2011 4:15 pm
by Jim Bretti
This problem is fixed in version 3.0.20.